Product ID:STARGLAZE 2000 PART A, (2020AINL)
MSDS Date:06/05/1992
FSC:8010
NIIN:00N036042
MSDS Number: BXYJP

CARBOLINE CO

350 S HANLEY RD
ST LOUIS, MO 63144
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 314-644-1000

Cage: 06634

CARBOLINE CO

ST. LOUIS, MO 63144-1599 US

Telephone: 314-644-1000

Cage: 06634

EPON 820 (EPOXY RESIN)

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 85%

OSHA PEL N/K

ACGIH TLV: N/K

PROPANE, 1,2-EPOXY-3-((2-ETHYLHEXYL)OXY)-; (ALKYL GLYCIDYL

CAS: 2461-15-6

RTECS: TZ3300000

Fraction By Weight: 15%

OSHA PEL N/K

ACGIH TLV: N/K

COLOR PIGMENT MIXTURE MAY CONTAIN INGS 4-7 IN VARYING

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

IRON III OXIDE; (IRON OXIDES)

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL N/K

ACGIH TLV: N/K

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

PARTICULATES; (PARTICULATES NOT OTHERWISE REGULATED)

OSHA PEL N/K

ACGIH TLV: N/K

VOLATILE ORGANIC COMPOUND (MIXED PRODUCT THINNED TO MAXIMUM

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE NOSE AND THROAT
IRRITATION. CONTACT: MAY CAUSE EYE IRRITATION. MAY CAUSE SKIN
IRRITATION. MAY CAUSE ALLERGIC SKIN REACTION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:IF SENSITIZED TO AMINES, EPOXIES OR
OTHER CHEMICALS DO NOT USE. SEE MD IF A MEDICAL CONDITION EXISTS.

First Aid:WHEN EXPOSED ALWAYS GET MEDICAL ATTENTION. EYES: FLUSH WITH
WATER FOR AT LEAST 15 MINUTES. SKIN: WASH WITH SOAP & WATER. REMOVE
CONTAMINATED CLOTHING AND CLEAN BEFORE REUSE. INHAL: REMOVE TO
FRESH AIR . PROVIDE OXYGEN IF BREATHING IS DIFFICULT. USE
ARTIFICIAL RESPIRATION IF NOT BREATHING. GET MEDICAL ATTENTION.
INGEST: DO NOT INDUCE VOMITING! ALWAYS GET MEDICAL ATTENTION.

Flash Point Method:SCC
Flash Point:205F,96C
Lower Limits:1000%
Upper Limits:1.0%
Extinguishing Media:DRY CHEMICAL, FOAM, CARBON DIOXIDE, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROTECTIVE
EQUIPMENT . EVACUATE HAZ AREA OF UNPROTECTED PERS. COOL SURROUNDING
CNTNRS W/WATER IN CASE OF FIRE EXPOSURE.
Unusual Fire/Explosion Hazard:VAPS ARE HVR/AIR & WILL ACCUM. VAPS WILL
FORM EXPLO CONCS W/AIR. VAPS TRAVEL LONG DISTANCES & WILL FLASH
BACK. USE MECH VENT WHEN NEC TO KEEP % VAP BELOW LEL.

Spill Release Procedures:ELIM ALL IGNIT SOURCES. HNDLG EQUIP MUST BE
GROUNDED TO PVNT SPARKING. EVACUATE AREA OF UNPROTECTED PERS.
FOLLOW SAFE HNDLG & USE GUIDELINES. CONTAIN & SOAK UP RESIDUAL
W/ABSORB (CLAY/SAND). TAKE UP A BSORB MATL & SEAL TIGHTLY FOR
PROPER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, OPEN
FLAME & STRONG OXIDIZING AGENTS. KEEP CONTAINERS CLOSED. STORE IN
COOL, DRY PLACE WITH ADEQUATE VENTILATION.
Other Precautions:IF POURING OR TRANSFERRING MATERIALS GROUND ALL
CONTAINERS AND TOOLS. DO NOT WELD, HEAT, CUT OR DRILL ON FULL OR
EMPTY CONTAINERS. FOR INDUSTRIAL USE ONLY.

Respiratory Protection:USE ONLY W/VENTILATION TO KEEP LEVELS BELOW
EXPOSURE GUIDELINES. USER SHOULD TEST & MONITOR EXPOSURE LEVELS TO
INSURE ALL PERSONNEL ARE BELOW GUIDELINES. IF NOT SURE/IF NOT ABLE
TO MONITOR USE NIOSH/M SHA APPROVED AIR-PURIFYING RESPIRATOR.
Ventilation:USE EXPLOSION-PROOF VENTILATION WHEN REQUIRED TO KEEP BELOW
HEALTH EXPOSURE GUIDELINES & LEL.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:IMPERVIOUS CLOTHING. IF MATERIAL PENETRATES
TO SKIN CHANGE GLOVES AND CLOTHING.
Work Hygienic Practices:WASH W/SOAP & WATER BEFORE EATING, DRINKING OR
USING TOILET FACILITIES. USE OF HAND CLEANER IS RECOMMENDED.
(SUPDAT)
Supplemental Safety and Health
HAZ DECOMP PRODS: CUTTING OR ABRASIVE GRINDING CAN CREATE SMOKE &
FUMES. DO NOT BREATHE. HYGIENE PRACTS: LAUNDER CONTAMINATED
CLOTHING BEFORE REUSE. LEATHER SHOES CAN ABSORB & PASS THRU HAZ
MATLS. CHE CK SHOES CAREFULLY AFTER SOAKING BEFOREREUSE.

Spec Gravity:1.10
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:16

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES.
Hazardous Decomposition Products:CARBON MONOXIDE & UNIDENTIFIED ORG
CMPDS. CONSIDER ALL SMOKE & FUMES FROM BURNING MATL AS VERY HAZ.
WELDING, (SUPDAT)

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.